AEG NII84R00FB Benutzerinformation Seite 61

FlexiBridge function
The flexible induction cooking area consists
of four sections. The sections can be
combined into two cooking zones with
different size, or into one large cooking area.
You choose the combination of the sections
by choosing the mode applicable to the size
of the cookware you want to use. There are
three modes: Standard, Big Bridge, and Max
Bridge.
To set the heat setting use the two
control bars on the left side.
Switching between the modes
To switch between the modes press
heat setting levels will be kept.
Diameter and position of the cookware
Choose the mode applicable to the size and
the shape of the cookware. The cookware
should cover the selected area as much as
possible.
Place the cookware with the bottom diameter
smaller than 160 mm centrally on a single
section. You can use a roaster pan for the Big
Bridge and the Max Bridge modes.
Place the cookware with the bottom diameter
larger than 160 mm centrally between two
sections.
. The
FlexiBridge Standard mode
This mode is activated by default when you
activate the function. It connects the sections
into two separate cooking areas. You can set
the heat setting for each area separately. Use
the two control bars on the left side.
Correct cookware position:
100-160mm
> 160 mm
ENGLISH 61