Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 Transport and storage
3.1 Transport
During transport, it has to be made sure that the pump cannot be knocked into and is not
dropped.
3.2 Temporary storage / conservation
For this purpose, the plant has to be warehoused horizontally in a dry, dark or sun-
protected as well as frost-proof area. Additional conservation is not required.
4 Product description
The fl at suction pump is equipped with a robust AC motor. Sealing of the pump housing
towards the motor takes place on the pump side by a mechanical seal and by a radial
shaft seal on the motor side.
• Suction from 15 mm and up to 1 mm (wipe-dry)
• integrated check valve for backfl ow prevention
• Motor winding with built-in thermal winding protection
• vertical pressure outlet 1" male thread and additional hose connection DN 25
• Sound level: < 70 dB
In combination with electronic level control ENS 1.1 , automatic mode incl. alarm is
possible. The switch-on point is at approx. 25 mm, the shut-down point is at approx. 3 mm.
The fl at suction pump with ENS 1.1 can be installed in pipes from 200 mm Ø.
4.1 Scope of delivery
• FSP 330
• electrically wired, cable type 05 RN-F, 10 m
• wired ready-to-plug-in
Optional accessories:
• electric level control ENS 1.1 Art. No. 11414
Flat suction pump FSP 330
English
33
Werbung
