2measure 250202 Bedienungsanleitung Seite 7

Alarm clock setting
To configure the alarm clock settings, push the MODE button once. The alarm clock setting mode will appear on the
display (A5). Then, push and hold the MODE button. The hour digit will start flashing.
Set the correct value using the UP and DOWN buttons. Confirm the selection by pushing the MODE button once and
move to the minute setting. The minute digits will start flashing. Having selected and confirmed the settings, the station
will return to the normal display mode.
To activate/deactivate the alarm clock, in normal display mode, click the UP button once. The current status of the
function is provided by the alarm clock icon
Temperature display format (°C or °F)
To change the displayed temperature unit (A2 A3), press the DOWN button once.
Minimum/maximum temperature and humidity measurement memory
To display the measurements of temperature and humidity stored in the station's memory:

press the MEM button once for the maximum measurements,

press the MEM button twice for the minimum measurements,

press the button MEM three times to restore the normal display mode.
To clear the memory, press and hold the MEM button.
Outdoor temperature alert
To configure the temperature alert, push and hold the ALERT button. Shortly, temperature (A3) will start flashing on the
display. Set the correct value of the upper temperature limit with the UP and DOWN buttons. Then, by pressing the
ALERT button once, confirm the selection and move to settings temperature lower limit.
To activate/deactivate the temperature alert, in normal display mode, push the ALERT button once. The current status
of the function is provided by the alert icon (A3) appearing on the display.
Additional information
When the measured temperature/humidity value is outside of the device operational range, the following indicators will
appear on the display (A2, A3, A6, A7):
 HH – values above the range
 LL – values below the range
The outdoor sensor is exposed to weather conditions. It must be protected from falling and flooding. As a sensitive part
of the weather station, it can be damaged.
Errors which indicate that the outdoor sensor is defective
- information on the outdoor weather conditions disappears from the weather station display
- Incorrect temperature readings
Caution!
Every household uses electrical and electronic appliances, and thus is a potential source of waste, hazardous to humans
and the environment, due to the presence of hazardous substances, mixtures, and components in the
equipment. On the other hand, discarded equipment is a valuable resource from which raw materials like
copper, tin, glass, iron, and others can be recovered.
The symbol of the crossed out wheelie bin placed on the equipment, packaging, or documentation attached to
it, means that the product must not be disposed of together with other waste. The labelling simultaneously
means that the equipment was introduced to the market after the date of August 13th, 2005.
It is the responsibility of the user to transfer the used equipment to a designated collection point for proper recycling.
Information on the available collection system for electrical equipment can be found in the shop's information and at the
municipal office. Proper handling of discarded equipment prevents negative consequences for the environment and
human health!
Producer BROWIN Sp. z o. o. Sp. k. ul. Pryncypalna 129/141, PL 93-373 Łódź represents that the appliance of
2measure brand, 250202 model, is compatibles with the Directive 2014/53/EU of the European Parliament and the
Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to making available on the
market of radio equipment and repealing the Directive 1999/5/EEC. Full Declaration of Conformity is available at the
website www.browin.pl
(A4) appearing on the display.
7