Werbung
Verfügbare Sprachen
Verfügbare Sprachen
www.akrapovic.com
FINAL INSTALLATION:
IMPORTANT: reinstall the dismounted or partially removed stock parts (wheel arches,
bumper etc.); check vehicle manufacturer manual for tightening torques.
IMPORTANT: make sure all the nuts and bolts are sufficiently tightened. In case the
exhaust system touches the cowling or other parts, repeat the adjustment of the exhaust
system or contact your authorized dealer.
IMPORTANT: clean all exhaust components before the first start of the engine or the
stains will burn onto the surfaces!
MAINTENANCE OF THE AKRAPOVIČ EXHAUST SYSTEM:
1.
Clean the titanium exhaust components with a multi-purpose spray lubricant (WD-40
equivalent)*, carbon fiber exhaust components with soft and dry cloth and stainless steel
components with soft cloth sprayed with contact cleaner, then wipe with soft and dry cloth. A
change in the color of the exhaust system is normal due to high temperatures.
2.
Periodically make sure all the bolts and springs are sufficiently tight.
*WD-40 ® is a trademark of the WD-40 Company.
INSTALLATION TIP: IT IS NORMAL FOR WHITE SMOKE TO COME OUT OF THE MUFFLER
AT FIRST OPERATION.
CAUTION: DO NOT STAND BEHIND THE MUFFLER AT ANY TIME.
CAUTION: DO NOT USE AUTOMOTIVE WHEEL CLEANERS OR ANY CLEANING PRODUCTS
WHICH CONTAIN ACIDIC ADDITIVES TO CLEAN THE AKRAPOVIČ EXHAUST SYSTEMS.
WARNING: THE EXHAUST SYSTEM CAN BE EXTREMELY HOT. ALLOW THE EXHAUST AND
ENGINE TO COOL DOWN BEFORE BEGINNING INSTALLATION OR ANY OTHER WORK ON
THE EXHAUST SYSTEM. THIS MANUAL IS SPECIFIC TO THE PORSCHE 911 GT3 TYPE
991.2. THERE MAY BE SOME DIFFERENCES IN INSTALLATION PROCEDURES FOR OTHER
MODELS.
®
or
52 / 56
Werbung
