For Slip-On only: reinstall all dismounted stock parts; check vehicle manufacturer manual for
9.
correct procedures and tightening torques.
CAUTION: make sure not to injure yourself or damage any part of the exhaust system during this process!
10. For Slip-On only: adjust and center the Tail Pipes in respect to the bumper's cut out and
tighten the tail pipes' nuts to the specified torque (F 30).
CAUTION: make sure not to injure yourself or damage the Tail Pipe during this process!
F 30
41 / 56
22Nm
3 x
16ftlb