Akrapovic Evolution Race Header Set Einbauanleitung Seite 175

16. Reinstall all dismounted stock parts; check vehicle manufacturer manual for correct proce-
dures and tightening torques.
CAUTION: make sure not to injure yourself or damage any part of the exhaust system during this process!
17. Adjust and center the Tail Pipe in respect to the bumper's cut out and tighten the tail pipes' nuts
and bolt to the specified torque (F 40).
CAUTION: make sure not to injure yourself or damage the Tail Pipe during this process!
F 40
51 / 56
22Nm
3 x
16ftlb