Stihl KGA 770.0 Gebrauchsanleitung Seite 27

7 Activating and Deactivating Bluetooth® Radio Interface
6.2 Displaying the charge level
1
► Press the button (1).
The LEDs light up green for about 5 seconds
and indicate the state of charge.
► If the LED on the right flashes green: Charge
the battery.
6.3 LEDs on the Battery
The LEDs can indicate the state of charge of the
battery or any faults. The LEDs can may light up
steady or flash in green or red.
If the LEDs light up steady or flash green, this
indicates the state of charge of the battery.
► If the LEDs light up steady or flash red: Trou‐
bleshooting, 19.1.
The push sweeper or battery malfunctions.
7 Activating and Deactivating
Bluetooth® Radio Interface
7.1
Activating the Bluetooth
Interface
► If the battery has a Bluetooth
Press and hold the pushbutton until the
®
"BLUETOOTH " LED next to the
lights up blue for approximately 3 seconds.
®
The Bluetooth radio interface on the battery
is activated.
7.2
Deactivating the Bluetooth
Radio Interface
► If the battery has a Bluetooth
Press and hold the pushbutton until the
®
"BLUETOOTH " LED next to the
lights up blue six times.
®
The Bluetooth radio interface on the battery
is deactivated.
0458-769-9601-B
80-100%
60-80%
40-60%
20-40%
0-20%
Radio
®
®
radio interface:
symbol
®
®
radio interface:
symbol
8 Assembling the push
sweeper
8.1 Attaching the Push Sweeper
The push handle can be attached in 2 positions,
depending on the height of the user.
► Adjust the push handle to suit the user's
height.
► Switch off the push sweeper and remove the
battery.
1
► Align both holders (1) to an upright position.
► Slide the push handles (2) simultaneously into
the holders (1).
The spring clips (3) must engage audibly.
9 Removing and Fitting the
Battery
9.1 Inserting the Battery
1
2
► Insert the battery (1) into the battery compart‐
ment (2) as far as it will go.
The battery (1) engages with a click and is
now locked.
English
2 2
3
3
1
1
27