Panasonic EY7412 Bedienungsanleitung Seite 9

b) Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek medi-
cal help.
Liquid ejected from the battery may cause irritation or burns.
c) Do not use a tool that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behaviour resulting in fire, explosion or risk of injury.
d) Do not expose tool to fire or excessive temperature.
Exposure to fire or temperature above 130 °C may cause
explosion.
e) Follow all charging instructions and do not charge the tool
outside the temperature range specified in the instructions.
Charging improperly or at temperatures outside the specified
range may damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified repair person
using only identical replacement parts.
This will ensure that the safety of power tool is maintained.
b) Never service damaged tools.
Service of tools should only be performed by the manufacturer
or authorized service providers.
Screwdrivers/impact wrenches safety warnings
Hold the power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring.
Fasteners contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an
electric shock.
III. ADDITIONAL SAFETY RULES
1) If the bit becomes jammed, immediately turn the forward
rotation switch off to prevent an overload, which can damage
the battery or motor.
Use reverse motion to loosen jammed bits.
2) To prevent injury during use, hold the tool steady at all times
and avoid waving it around.
3) Ensure that there are no hidden gas or water pipes in the area
in which you will be working. Contact with hidden pipes or wires
could cause electric shock or water or gas leaks.
4) Make sure to hold the object you are working on steady.
- 9 -
E
N