Panasonic EY7412 Bedienungsanleitung Seite 16

VI. MAINTENANCE
E
• Use only a dry, soft cloth for wiping the unit.
N
Do not use a damp cloth, thinner, benzine, or other volatile
solvents for cleaning.
• In the event that the inside of the tool or battery is exposed to
water, drain and allow to dry as soon as possible. Carefully remove
any dust or iron filings that collect inside the tool. If you experience
any problems operating the tool, consult with a repair shop.
VII. ACCESSORIES
• Use only bits suitable for size of chuck.
• Bit set for Cordless Screw Driver
One head, dimension of stepped section 13 mm, 5 bits (EY7412)
1. Phillips
2. Phillips
3. Phillips
4. Flathead
5. Phillips
One head, dimension of stepped section 13 mm, 2 bits (EY1D11)
1. Phillips
2. Phillips
• USB socket cable
Length 50 cm
EY7412: USB (typeA) - microUSB (typeB)
EY1D11: USB (typeA) - microUSB (typeC)
VIII. APPENDIX
MAXIMUM RECOMMENDED CAPACITIES
Model No.
Tightening a
screw
WARRANTY SUPPLEMENT
The breakdown and damage caused by usage consistent for a long
time (e.g.: factory work on the assembly line, etc.) is out of warranty.
#2
#2
#1
Width 6 mm
#2
#2
#2
Small For
screw Steel
- 16 -
Length 150 mm
Length 100 mm
Length 100 mm
Length 100 mm
Length 45 mm
Length 100 mm
Length 45 mm
EY7412
Up to M3 (electrical)
Up to M6 (hand tightening)
EY1D11