Panasonic EY7412 Bedienungsanleitung Seite 13

5. To remove the bit, pull out the collar in the same way.
Use 6.35 mm hexagonal bits.
To ensure proper securement of the bit, use only hexagonal bits
with 9.5 mm detent.
Use the following bits.
For two head bits
Check that the bit does not come out by pulling it lightly.
V. OPERATION
WARNING!
• Do not inhale smoke emitted from this unit as it may be harmful.
[Main Unit]
NOTE:
Exercise caution to ensure no objects come into contact with the
tool's separate push switches.
Decide to rotate forward or reverse, and press the
switch firmly [Fig.3]
Individually for forward/reverse rotation.
It will take some time to start moving after pressing the switch.
This unit will not operate even when the switch is pressed while
charging.
CAUTION:
The operating temperature range of the lithium ion battery is 10
to 40°C. This unit may not operate properly when this unit is
cooled to 10°C or lower in cold weather, etc. In such case, leave
this unit in a location that is 10°C or higher for 1 hour or longer to
raise the temperature of this unit, and use it after this unit has
warmed up.
CAUTION:
Stop the operation when this unit gets hot, and use after the heat
has sufficiently dissipated.
For one head bits
- 13 -
E
N