Bauknecht GCF 2152 Gebrauchsanweisung Seite 19

A rinse-aid is necessary so that
no water-spots or calcium streaks
remain on dishware after washing.
Use only rinse-aid intended for
household dishwashers,
Turn lid of the rinse-aid reservoir
(Fig. &/24) to open.
Pour in rinse aid until the level indicator
(Figure ©#/25) has turned from clear to
completely. dark. The clear/dark surface
indicates the level of rinse-aid in the dispenser.
Remember to screw lid tightly on afterwards.
With each washing, the correct amount
of rinse-aid will be dispensed.
Low rinse-aid indicator
Fig, 23/25
When the low rinse-aid indicator appears
bright, the rinse-aid must be replenished.
If it is dark, there is enough rinse-aid
on hand.
16
Dispenser regulator
Fig. &/26
The dispenser regulator may be set
between 1 and 6. Upon delivery,
it will be set on 3.
The setting should only be changed
if deposits or water spots remain
on the dishware.
~ If lime streaks appear,
turn the regulator back.
— If water spots appear, ;
set the regulator on a higher number.