Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Telescopic shears Magma E-35 TR 21 V
Please check that the electric shears and batteries (not included) are clean and dry.
Place the battery onto the loppers'body by sliding it downwards until it clicks-in. To disconnect
the battery, push the two lateral buttons and pull upwards.
7
Operation modes
Automatic cutting: The blades close completely whenever the trigger is pulled by the operator.
By releasing the trigger, the blades reopen completely.
Security blade's lock: it allows locking the blades in order to avoid that they open when the
trigger is pulled accidentally.
Operating instructions
Automatic cutting:
1.
Push the ON/OFF switch and wait for the audible tone (1 bip, 1 bip-bip-bip) to release.
2.
Quickly pull the trigger twice, repeatedly, to unlock the blades. The shears emit an audible
tone (1 beep) and the blades open.
3.
The shears now automatically work in automatic cutting mode. It is now possible to start
working.
124
Art. 614
Telescopic shears Magma E-35 TR 21 V
Assembly
Usage
Art. 614
Telescopic shears Magma E-35 TR 21 V
Usage
Manual activation of the security lock/unlock of the blades:
1.
To activate the security lock of the blades, keep the trigger pulled until the shears emit an
audible tone, followed by other three repeated audible tones (1 beep, 1 beep-beep-beep).
With this operation, the blades close. By pulling the trigger, the blades don't move.
2.
To deactivate the security lock of the blades, quickly pull the trigger twice, repeatedly. The
shears emit and audible tone (1 beep) and the blades open to maximum aperture. Now the
blades close whenever the trigger is pulled.
General instructions
Normally, the cuttings are even and smooth causing no damage to the plants. If an abnormality
occurs, simply release the trigger and the blade will open in the maximum position to avoid
personal injury or property damage. Do not use the device on rainy days. Before using, please
check if the blade is sharp. If the blade is blunt, be sure to sharpen the blade to obtain optimal
performance and avoid damages to the shears. Always close the blades before switching the
shears off, in order to avoid any damages to things or people.
Assembling the battery and the handle
Insert the battery into the dedicated slot at the bottom of the
handle by sliding it downwards until it clicks-in. To disconnect
the battery, push the two lateral buttons and pull upwards.
For further information about the product, please contact info@stockergarden.com
7
125
Werbung
