ThermoFlow Kompakte Serie Bedienungsanleitung Seite 29

DE
Troubleshooting by users
Problem
The water temperature at the
faucet is less or greater than
the temperature setting of my
water heater.
6. Warranty Conditions
The rights under this manufacturer's warranty shall apply in addition to
Warranty
the buyer's statutory rights. This warranty shall in no way restrict the
buyer's statutory rights in particularly towards the seller.
The claiming of rights under this warranty shall be subject to the sub-
Entitlement
mission of the respective proof of purchase and the duly completed
professional-card in accordance with the enclosed form. The profes-
sional-card should also be signed by the professional.
NEG-Novex Großhandelsgesellschaft für Elektro- und Haustechnik
Content
GmbH, Chenover Str. 5, 67117 Limburgerhof, Germany, shall guaran-
tee as the manufacturer that this product is free of material and man-
ufacturing errors. Material and manufacturing errors arising during the
warranty period shall justify the rights under the warranty. This warran-
ty shall not cover errors due to improper installation or incorrect taking
into use, incorrect operating conditions or defective maintenance or
repair work.
Manual elex10.indd 29 Manual elex10.indd 29
GB
Cause
Ant i - S c a l d pressure/
balancing valve or tem-
pering valve.
Thermal loss due to long
pipe run
Water temperature at
the faucet is too hot
Solution
Your faucet may have an
anti-scald feature or a tem-
pering valve that automati-
cally mixes cold water even
when you turn your control
lever or handle to full hot.
These devices are usually
adjustable so you can turn
off the cold mix completely.
You can compensate for this
by increasing the setting on
your water heater if you
need/want hotter water.
As the hot water from the
heater runs through the hot
water delivery system to
your faucet, some heat will
be lost especially if it has
long distance to travel or the
pipes are cold. This is nor-
mal. You can compensate for
this by increasing the setting
on your water heater if you
need/want hotter water.
Set point temperature is too
high.
2022/8/9 下午1:51 2022/8/9 下午1:51
29