Texas 90062059 Bedienungsanleitung Seite 21

12. Spark plug
13. Maintenance and storage
Every time the machine has been used it should be cleaned completely.
If the machine will not be used for a longer period of time the fuel tank must be emptied
completely. All metal parts must be oiled to prevent corrosion.
Remove the spark plug, pour a few drops of engine oil into the cylinder and pull the star-
ting cord 2-3 times to make the oil disperse. Fit the spark plug.
Check the spark plug after 10-15 hours of use.
Remove the spark plug cap. Use the spark plug wrench to re-
move the spark plug.
Clean the spark plug and adjust the spark plug gap to 0.6 - 0.7
mm.
Replace damaged or worn spark plugs.
Fit the spark plug with your fingers. Fasten tightly using the
wrench.
Use spark plugs type Denso W14M-U10.
Only use original spare parts.
www.texas.dk
20