Skoda 3T9 Montageanleitung Seite 14

GB
Loading – securing the cargo
Never tighten the parts of the crossbar carriers together.
Loading – mounting additional extension parts
First mount the crossbar carrier onto the lateral roof bars. Then
fasten the additional extension parts (e.g. bicycle holder, ski
holder, surfboard holder) according to the respective manual
of the extension parts in question. Caution: We recommend
only using sockets mounted on the T-slots (using a T-bolt). As-
sembly with metal U-shaped sockets could damage the sur-
face treatment on the bearing profiles of the cross rail.
Assembly procedure
- Fig. 2 -
- Turn the key to the vertical (open) position and remove the
cover.
- Move the safety lever in the direction of arrow 1 and release
the detent arm, arrow 2. Be careful not to damage your
hand!
- Repeat these steps for the base of the second crossbar carrier.
- Fig. 3 -
- Place the crossbar carrier with the fastening mechanism
open on the lateral roof bars and centralize it so that both