Herunterladen Diese Seite drucken

Electrolux GA60SL3VS Benutzerinformation Seite 18

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

10.1 Using the detergent
A
B
C
CAUTION!
Only use detergent specifically designed
for dishwashers.
1. Press the release button (A) to open the
lid (C).
2. Put the detergent (gel, powder or tablets)
in the compartment (B).
3. If the programme has a prewash phase,
put a small quantity of detergent on the
inner part of the appliance door.
4. Close the lid. Make sure that the lid locks
into position.
For information about the detergent
dosage, refer to the manufacturer's
instructions on the packaging of the
product. Usually, 20 - 25 ml of gel
detergent is adequate for washing a load
with normal soil.
The upper ends of the two vertical ribs
inside the compartment (B) indicate the
maximum level for filling the dispenser
with gel (max. 30ml).
10.2 Remote start
Activate this function to remotely control and
monitor your dishwasher in the app.
18
ENGLISH
How to activate the remote start
Make sure that the indicator
your dishwasher is added in the app. If not,
refer to "Wireless connection" chapter.
1. Press
.
• The light related to the button is on.
• The indicator
• The indicator
2. Close the appliance door.
3. Use the app to remotely operate the
appliance.
Opening the door deactivates the remote
start. Refer to the information provided
further in this chapter.
How to deactivate the remote start
Press
until the display shows 0h.
• The light related to the button is off.
• The indicator
• The indicator
• The appliance returns to the
programme selection.
10.3 How to select and start a
programme using MY TIME
selection bar
1. Slide your finger across MY TIME
selection bar to choose a suitable
programme.
• The light related to the selected
programme is on.
• The ECOMETER indicates the level of
energy and water consumption.
• The display shows the programme
duration.
2. Activate applicable EXTRAS if desired.
3. Close the appliance door to start the
programme.
10.4 How to select and start the
programme
Pre-rinse
1. To select
Pre-rinse, press and hold
for 3 seconds.
is on and
is off.
is on.
is off.
is on.

Werbung

loading