Herunterladen Diese Seite drucken

Electrolux GA60SL3VS Benutzerinformation Seite 15

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CAUTION!
If children have access to the appliance,
we advise to deactivate AirDry. The
automatic opening of the door may pose
a danger.
7.6 TimeBeam
TimeBeam displays the following information
on the floor below the appliance door:
• The programme duration when the
programme begins.
8. WIRELESS CONNECTION
You can connect your dishwasher to the
home wireless network and then link it to your
mobile devices in the app. This functionality
allows you to remotely control and monitor
your dishwasher.
Wi-Fi module parameters
Wi-Fi module
NIUS-SA
Frequency
2.412 - 2.472 GHz
Protocol
IEEE 802.11 b-g-n
Max Power
<20 dBm
Encryption
WPA, WPA2
8.1 How to connect the dishwasher
to the network and to the app
To connect your dishwasher, you need:
• Wireless network with the Internet
connection.
• Mobile device connected to the wireless
network.
• 0:00 and CLEAN when the programme is
completed.
• DELAY and the countdown duration when
the delay start begins.
• An alarm code when the appliance has a
malfunction.
When AirDry opens the door, TimeBeam
is off. To check the remaining time of the
running programme, look at the control
panel display.
7.7 PNC number
If you contact an Authorised Service Centre,
you need to provide the product number code
(PNC number) of your appliance.
The number can be found on the rating plate
on the appliance door. You can also check
the number on the display. Select PNC
number from the setting list to check the
number.
1. To download the app, scan the QR code
located on the back cover of the user
manual. You can also download the app
directly from the app store.
2. Follow the instructions in the app.
3. Turn on the dishwasher.
4. To activate the wireless connection,
follow one of the two methods:
• Press and hold simultaneously
for 2 seconds.
• Enter setting mode, select the setting
WiFi and change its values to ON.
The display shows Wi-Fi is starting up and
then Wi-Fi is ready.
5. When prompted, enter the home network
credentials in the app.
If the credentials are not entered, the
dishwasher deactivates the wireless
connection after some time.
If the connection is successful, the
dishwasher displays Connection
and
ENGLISH
15

Werbung

loading