Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Remove the hinge cover and dismount the upper
door hinge.
• Lift out the fridge door; move the door stopper on
the door underside. Set the door safely aside.
• Dismount the middle door hinge. Lift out the
freezer door; move the door stopper on the door
underside. Set the door safely aside.
• Tilt the appliance slightly backwards and block it
in this position. Unscrew the feet and dismount
the lower door hinge.
• Transfer and fasten the lower door hinge to the
opposite unit side; after you have unscrewed the
hinge pin and inserted it on the other hinge side.
Screw in the feet accordingly.
• Put the appliance back in the upright position.
Move the blind plugs to the exposed holes of the
middle door hinge.
• Put on the freezer door and fix it in the intended
position.
• Rotate the middle door hinge by 180°, move and
fasten it on the opposite unit side.
• Move the dummy cap on the appliance top into
the opposite exposed holes.
• Put on the fridge door and fix it in the intended
position.
• Transfer and fasten the upper door hinge on the
opposite unit side; after you have unscrewed the
hinge pin and inserted it from the other hinge
side.
• Put on the hinge cover* included in the scope of
delivery.
Check that the doors are aligned vertically and hori-
zontally to ensure proper opening and closing of the
doors.
Startup / Operation
Intended use
The appliance is intended for use in private house-
holds.
The fridge compartment is suitable for cooling per-
ishable foods such as milk, dairy products, meat,
fish, eggs, margarine, various spreads and fruit and
vegetables that are not sensitive to cold.
The freezer compartment is suitable for storing
commercially frozen food, freezing fresh, room-
temperature food and making ice cubes.
Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
"Cleaning and maintenance".
the chapter
Starting the appliance
• Connect the appliance to the power supply.
• Set the operating conditions. See also the follow-
ing sections.
Settings
Position [ 0 ] means that the appliance is in the
switched-off state. Turn the temperature control
clockwise from this position, the appliance switches
on automatically.
The power levels [ 1 – 7 ] control the different values
of the internal temperature.
24
Werbung
