IFM Electronic ecomot 200 DW2003 Betriebsanleitung Seite 22

FA-1
MONITOR
According to the technical specifications below the unit can be operated in a wide
operating temperature range. Because of the additional internal heating the oper-
ating elements and the housing walls can have high perceptible temperatures
when touched in hot environments.
In case of malfunction of the unit or uncertainties please contact the manufacturer.
Tampering with the unit can seriously affect the safety of people and equipment.
This is not permitted and leads to an exclusion of liability and warranty.
2. Function and features
The FA-1 monitor is a programmable frequency-to-current converter. It takes the
pulses of external pulse pick-ups and determines the input frequency on the basis
of the period measurement. It calculates the value of the analogue standard signal
in mA or V on the basis of the set parameters.
As a transducer it can for example be used to trigger
• analogue measurement or recording units,
• plc input cards or
• frequency converters as speed pick-up.
Analogausgang
analogue output
page 22
Impulsgeber
pulse pick-up
IN 1
MONITOR
FA-1
OUT1 OUT2
Schaltausgang
switching output
Example 1
Detection of a quantity per time
unit or conversion of the mea-
sured value into an analogue
standard signal
bottles/hour
Meldung Flaschen/Stunde
message
e.g.
z.B.