Chicco SEETY Bedienungsanleitung Seite 14

SWIVEL WHEELS
The stroller has front swivel/fixed wheels. It is recommend-
ed to use the wheels in the fixed mode on particularly
changeable surfaces. The use of the wheels in the swivel
mode is recommended in order to increase the control of
the stroller on a normal road surface.
13. To use the front wheels in swivel mode, push down on
the lever located on the back of the wheels (Fig. 13). To
lock it, push upwards returning the lever to its original
position (Fig. 13A).
HANDLE ADJUSTMENT
The stroller features a handle that can be adjusted in height,
according to the user's needs.
14. Starting from the lowest position, the handle can be
adjusted to 3 different positions by pressing the release
button located on the centre of the handle (Fig. 14).
WARNING: After switching from one position to the other,
make sure the automatic locking mechanism is properly
engaged.
FOLDING THE STROLLER
WARNING: When unfolding and folding this product,
make sure that your child or other children are at a safe
distance. Make sure that during these operations the mov-
ing parts of the stroller do not come into contact with your
child.
WARNING: You must remove all contents from the basket
before closing the stroller.
15. The stroller can be folded either without the seat or with
the seat (in either configuration: forward facing or rear-
ward facing).
Close the hood, lift the lever on the upper edge of the back-
rest (Fig. 15) and push the backrest forward until it reaches
the most compact position. Then press the central button
located on the handle and push forward to compact the
structure and close the stroller (Fig. 15A).
To unfold the stroller, in whatever configuration (forward
facing or rearward facing) the steps are the same. Release
the closure lever on the side of the stroller (Fig. 1), take hold
of the handle and front tube and rotate until a click con-
firms that the stroller has opened completely. To open the
handle to use position, press the central button positioned
on it and adjust it according to your height (Fig. 1A). Finally,
rotate the seat upwards to the position of use.
The stroller features a practical carrying handle to facilitate
movement.
LEG COVER
16. This element is present and can be used only and exclu-
sively if you have also purchased the compatible carry
cot (SEETY BAG).
The carry cot cover may be also used as leg cover for the
stroller configuration.
To fit the leg cover, insert the legrest into the leg cover
pocket (Fig. 16) and fasten the buttons to the elastic bands
on the side of the seat. (fig. 16A).
RAIN COVER
17. The stroller is equipped with a rain cover.
To install, place the rain cover on the hood and then fasten
it to the lower part of the front bars. (fig. 17).
After use, if wet, let the rain cover dry off before folding and
storing it. The rain cover can be used both forward facing
and parent facing.
WARNING: The rain cover cannot be used on the stroller
without the hood being extended, as it may cause suffo-
cation. When the rain cover is fitted on the stroller, never
leave it exposed to direct sunlight with the child inside, as
the temperature will rise considerably.
REMOVING THE LINING - HOOD
18. If the fabric needs to be removed from the hood for
cleaning, follow these steps:
- To remove the hood, open the zip that secures the hood
to the backrest fabric (Fig. 18).
- Then pull the plastic lever inwards and remove the bar
from the plastic joint (Fig. 18A). repeat this operation on
the other side.
- Now it is possible to remove the bar from the hood fabric
(Fig. 18B). When washing, pay attention to the presence of
plastic components which can become deformed.
To reassemble the fabric and the hood carry out the opera-
tions in reverse order.
WARNING: The hood must be fixed on both sides of the
stroller. Ensure that the hood is correctly secured into po-
sition.
USING THE CAR SEAT
19. The CHICCO SEETY stroller allows the fastening of the
CHICCO KORY i-Size Fast In car seat.
19.1 To install the CHICCO KORY i-Size Fast In car seat, re-
move the seat or the carry cot and insert the lateral
couplings in the appropriate plastic slots of the stroller
until you hear the click when it is fastened correctly
(Fig. 19).
WARNING: The car seat should be fixed only and exclu-
sively parent-facing.
19.2 To remove the CHICCO KORY i-Size Fast In car seat,
press the buttons under the handle on both sides (Fig.
19A) and pull the car seat upwards using its handle in
the transport position (vertical).
USING THE CARRY COT
20. The CHICCO SEETY stroller allows the fastening of the
SEETY carry cot.
For instructions on assembling and disassembling the carry
cot refer to the manual for the SEETY carry cot.
WARNING: Before using the stroller with a carry cot, always
check that the attachment devices are correctly engaged
by pulling up.
WARNING: the carry cot may only be attached to the
frame in the parent-facing position.
WARRANTY
The product is guaranteed against any lack of conform-
ity under normal use as specified in the instructions. The
warranty shall not therefore apply in the case of damage
caused by improper use, wear or accidental events. For the
duration of warranty on conformity defects, please refer to
the specific provisions of national laws applicable in the
country of purchase, where provided.
14