Siemens SIMEAS R Wartungshandbuch Seite 86

Mass Storage
3.3 Replacing the Mass Storage
3.3 Replacing the Mass Storage
3.3.1 Replacing a 2.5" Flash Disk with a 2.5" Flash Disk
Open the device as described in chapter 3.2.
Detach the CPU board by pushing the black locking levers right until the levers unlatch from
the PCB. Flip both locking levers forward simultaneously (approx. 45°) until the levers snap
into the second position on the PCB (see Figure 3-7).
Figure 3-7 Deblocking the CPU module (view with 2.5" flash disk on CPU module)
Pull the CPU module forward (see Figure 3-8).
Figure 3-8 Pulling the CPU module out (view with 2.5" flash disk on CPU module)
86
Digital Fault Recorder, SIMEAS R/SIMEAS R-PMU, Maintenance Manual
E50417-H1074-C364-A2, Release 11.2009