Siemens SIMEAS R Wartungshandbuch Seite 67

Remove the screws on the top edge of the front plate. Loosen the screws on the lower edge
only until the front plate can be easily removed (see Figure 1-11).
Figure 1-11 Removing the front plate
Note
Leaving the lower screws in the housing will make it easier to insert the front plate afterwards.
Flip the front plate forward (see Figure 1-12).
Figure 1-12 Open device
Caution
Do not strain the two ribbon cables that connect the front cover to the CPU board!
Digital Fault Recorder, SIMEAS R/SIMEAS R-PMU, Maintenance Manual
E50417-H1074-C364-A2, Release 11.2009
1.2 Battery Pack on the Power Supply Module (Option)
Battery and Battery Pack
67