Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Caution
Dangerous contact voltages may occur on the device even after it has been switched off
(process variables). In order to prevent hazards, enable the device and prevent it from being
switched on.
Opening the device
Remove the frame covering the device front. To do so, first fold down the upper and lower
cover strip at the frame. Next release the 4 captive screws in the corners of the frame (see
Figure 3-2).
Figure 3-2 Removing the cover frame
Remove the screws on the top edge of the front plate. Loosen the screws on the lower edge
only until the front plate can be easily removed (see Figure 3-3).
Figure 3-3 Removing the front plate
Digital Fault Recorder, SIMEAS R/SIMEAS R-PMU, Maintenance Manual
E50417-H1074-C364-A2, Release 11.2009
Mass Storage
3.2 Opening the Device
83
Werbung
