Lievers P-14E Bedienungsanleitung Seite 26

Power tool use and care
▪
Do not force the power tool. Use the correct power tool for your application.
The correct power too! will do the job better and safer at the rate for which it was designed.
▪
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
▪
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from
the power tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
▪
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the
hands of untrained users.
▪
Maintain power tools and accessories. Check for misalignment of binding or moving parts,
breakage of parts and any other condition that may affect the power tool's operation.
If damaged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
▪
Use the power tool, accessories and toot bits etc. In accordance with these instructions, taking
Into account the working conditions and the work to be performed. Use of the power too! for
operations different from those intended could result in a hazardous situation.
▪
Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not a!!ow for safe handling and control of the
tool in unexpected situations.
▪
Regular maintenance improves safe operation of the P14E poker vibrator.
▪
Protect sufficiently against moisture.
▪
Check if the ventilation openings in the motor housing are not blocked.
▪
Check the leads on the power cable and drive unit regularly.
▪
Check the fasteners of the machine regularly. When the P14E poker vibrator is in operation, the
fasteners can loosen due to the vibrations.
▪
Place a switched off P14E poker vibrator on a solid and stable surface.
▪
Always place the drive unit in a dry area.
▪
When the P14E poker vibrator is not being used for longer a period of time, then it must be stored
in a dry and clean area.
▪
When cleaning the P14E poker vibrator, ensure that no water or cleaning detergent gets into the
motor housing.
Service
▪
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power too! is maintained.
4.3 Rest risk
The manufacturer aimed for the best balance in functionality, safety and operation possibilities of the
P14E poker vibrator.
Please take notice of the following rest risk of the P14E poker vibrator:
Prolonged operation of P14E may damage your health. Never operate the P14E poker vibrator for longer
than an hour at a time. When operating frequently, it is obligated to wear vibration reducing gloves.
The manufacturer describes this as a rest risk. Nevertheless, well instructed operators with a correct
working attitude concerning safe operating are well capable of working safely with the P14E.
26/59 Gebruikershandleiding / User Manual / Bedienungsanleitung P14E, rev. 1.2: 16-03-20200