Changing The Light Bulb; Customer Service - AEG SANTO SZ91200 4I Gebrauchsanweisung

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light
bulb, switch off the appliance and unplug it, or disconnect from the
mains supply.
Light bulb data: 220-240 V,
1. To switch off, press the ON/OFF button until the mains power light
extinguishes.
2. Unplug the mains plug.
3. To change the light bulb,
rear hook and at the same time slide
the light bulb cover in the direction
indicated by the arrow.
4. Change the faulty light bulb.
5. Refit the light bulb cover.
6. Put the refrigerator back into opera-
tion.

Customer Service

If you cannot find the remedy for a malfunction in these operating
instructions, please contact your dealer or our customer service
department. Addresses and telephone numbers are listed in the accom-
panying booklet "Guarantee Conditions/Customer Service Locations".
Selective ordering of replacement parts can save unnecessary travel
and costs. For this reason always provide the following appliance
information:
• Model Name
• Model Number (PNC)
• Serial Number (S-No.)
This information can be found on the serial plate in the interior at the
left of the appliance. We recommend that you enter this information
here, so that it is handy if needed.
Note: The customer bears the costs of unjustified customer service
calls even during the guarantee period.
Downloaded from Fridge-Manual.com Manuals
52
max. 25 W
press on the