Control Panel; Control Panel / Temperature Setting Buttons - AEG SANTO SZ91200 4I Gebrauchsanweisung

Description of the appliance

Control panel

1 Pilot light (green)
2 ON/OFF switch
3 Temperature setting buttons (for warmer temperatures)
4 Temperature display
5 Temperature setting buttons (for colder temperatures)
6 TURBO
• TURBO COOLMATIC for intensive fridge cooling
7 Push button for
Temperature setting buttons
These buttons are connected to the temperature display.
• The temperature display is switched over from the display of the
ACTUAL temperature (temperature display is illuminated) to the dis-
play of the DESIRED temperature (temperature display flashes) by
pressing one of the two buttons, „+" or „-".
• With each further press of one of the two buttons, the DESIRED
temperature is adjusted by 1°C.
• If neither button is pressed, the temperature display automatically
switches back after a short period (approx. 5 sec.) to the display of
the ACTUAL temperature.
DESIRED temperature means:
The temperature that is required in the refrigerator, this can be adjust-
ed to the temperatures shown in the display. The DESIRED temperature
is indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the temperature that is currently
Downloaded from Fridge-Manual.com Manuals
38
COOLMATIC indicator light (yellow)
TURBO COOLMATIC
The temperature is adjusted using the „+"
(WARMER) and „-" (COLDER) buttons.