Sony Trinitron KV-C2521D Bedienungsanleitung Seite 32

How to view the video input picture
You can view the picture of video equipment connected to the input terminals by selecting the
input mode.
Operation
Symbol
Press -@) repeatedly to select Symbol for the selected input
the desired input. appears. (See the table below}
To return to the TV mode, press the ©) button.
Input modes
Result
Audio/video input through the @+-1 connector.
RGB input through the @+1 connector.
Audio/video input through the G 2/&$- connector.
63 2 S video input (from a VTR equipped with an S video output)
through the > 2/€s- connector.
You can also select the input mode using the A +24 —> ©) button on the TV.
In this case, first select ), and then press +/— buttons to select the input.
How to select the Output
The G@ 2/€$- connector outputs four kinds of audio/video signals. You have to select one of
them as follows.
Operation
Action
Press (> repeatedly to Symbol for the selected
select the desired input. output signals appeas.
(See the table below)
Output modes
Output from
The audio/video signal from the @+-1 connector
The audio/video signal from the > 2/€s- connector.
The audio/video signal from the IT aerial termind,
38