Sony Trinitron KV-C2521D Bedienungsanleitung Seite 29

TV stations broadcast teletext programmes via the TV channels. To receive teletext programmes,
use the buttons indicated in green on the full side of the Remote Commander.
With the simple side of the Remote Commander, only the basic operation is possible.
How to View the Teletext
Action
Result
Select the channel which carries
the teletext service you wish to view.
The channel changes on the screen.
2 Press ©.
Teletext will appear.
if the teletext signal is
not broadcast, then
FL) is displayed.
input three digits for the page number
using the number buttons.
Note:
If you make a mistake, type in any
three digits, then re-enter the correct
page number.
The numbers are entered on the screen.
The requested page will appear in a few
seconds.
To return to the TV mode:
Press ©.
To change the teletext channels:
First press © to return to the TV mode, then repeat steps 1 to 3.
Note
If the signal of the TV channel is weak, teletext errors may often occur.
How to Use the Advanced Features of Teletext
How to
Action
Result (On-screen display)
Request the index page.
Press €® (INDEX). The index page
appears.
Request the subtitle page (p888).
Press @).
The subtitle page is displayed (p888).
Access the next or preceding page
Press 9 (PAGE +) or &3 (PAGE -).
The next or
preceding page
appears.
P201
35