Sony Trinitron KV-C2521D Bedienungsanleitung Seite 31

Connector Acceptable input signal
Available output signal
Cr 1 Normal audio/video- and RGB signal
Video/audio from TV tuner
2/8s-
Connecting video equipment
Normal audio/video- and S-video signal
VHS}
<— co (ese ' aa
(Feecccreoye 1
@) anor
fpocooenceeky
[Fescocnegely
Commercially available
cord equipped with a
21-pin connector
* Use this connector for
connecting equipment
with S-video output.
Connecting an audio equipment
a 1
= 1
©)
©)R/D/D/D
RK-74 A
connecting cord (not supplied)
L/G/S/I fo
Connecting a computer with RGB output
(Fe oom
Oe cot
foac ocaa0ce
eoeesseoeeyy
Commercially available
cord equipped with a 21-pin connector
Video/audio from selected source
To connect a VTR using the TI terminal
Connect the aerial output of the VTR to the aerial terminal 17
of the TV.
S-video input (Y/C input)
Video signals may be separated into Y (Iuminance or bright-
ness) and C (chrominance) signals. Separating the Y and C
signals prevents them from interfering with one another, and
therefore improves picture quality (especially luminance).
This TV is equipped with one S-video input jack through
which these separated signals can be input directly.
If the picture or the sound is distorted
Move the VTR away from the TV.
37
~~ ae
e