Sony Trinitron KV-C2521D Bedienungsanleitung Seite 23

Note: These bottons
should be used in
preset mode only.
After you have installed this TV you need to preset TV channels.
TV stations broadcast their channels at certain frequencies. You must preset these channels to
programme numbers on this TV before you can watch the TV programmes.
There are 60 spaces for storing these channels.
Slide open the full function side of the remote commander to reveal preset buttons.
If you are unfamiliar with the cannel numbers of the stations you wish to preset, use
"How to preset channels automatically". If you are familiar with the channel numbers refer
to "How to preset TV channels directly".
How to preset channels automatically
Action
Result
1 Press > to enter the preset mode.
>
C)
The programme
number will start
flashing.
buttons to select the programme
number to which you want to preset
channels.
©@®@
g ®©©®
©O®
O®@
2 Press PROGR + or - or the number
Note:
To select a double-digit number,
use the -/- - button. For example, if
you want to choose 23, press -/--,
2, and then 3.
The programm
number changes.
Press EB] + or — once to search
forward or backward for channels.
- @ +
CY CJ)
When a channel is
tuned in, the search will
stop.
Note:
If you want to skipa
channel, press ey +
or eB) -.
Press © if you want to store the channel
which is tuned in.
Press > to exit preset j
mode without storing. CO
The channel is now
stored and you have
returned to TV mode.
Repeat steps 1 to 4 to store the
other channels.
29