Fronius TTG 220 P M Bedienungsanleitung Seite 18

Safety
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in severe personal injury and damage to property.
▶
▶
▶
Danger from electrical current.
This can result in severe personal injury and damage to property.
▶
Burning hazard due to hot welding torch components and coolant.
Serious burns may result.
▶
Risk of damage from operation without coolant.
Serious damage to property may result.
▶
▶
Danger from coolant escaping.
This can result in severe personal injury and damage to property.
▶
18
WARNING!
All the work and functions described in this document must only be carried
out by trained and qualified personnel.
Read and understand this document.
Read and understand all the Operating Instructions for the system compon-
ents, especially the safety rules.
WARNING!
All cables, leads, and hosepacks must always be securely connected, unda-
maged, correctly insulated, and adequately sized.
CAUTION!
Allow all welding torch components and the coolant to cool down to room
temperature (+25 °C / +77 °F) before starting any of the work described in
these Operating Instructions.
CAUTION!
Never use water-cooled welding torches without coolant.
The manufacturer accepts no liability for any damage resulting from impro-
per use. All warranty claims are considered void in such cases.
CAUTION!
When disconnecting the coolant hoses of water-cooled welding torches, al-
ways seal them using the plastic seal attached to them.