Kenwood UBZ-LH68 Bedienungsanleitung Seite 31

AUTO POWER OFF (APO)
Auto Power Off is useful when you happen to leave the
power ON unintentionally. This function saves battery
consumption. After 2 hours elapse with no key entries
and no call received, APO turns OFF the transceiver's
power; however, 1 minute before the power turns OFF, a
warning tone sounds (4 double beeps). When the power
is turned OFF by APO, the display clears and the APO
icon starts blinking. To turn the power back ON, press
the POWER switch.
1
2
3
4
With the transceiver power OFF,
press and hold the UP key, then press
the POWER switch.
Press the UP or DOWN key to select
"AP" (Menu No. 7).
Press the MODE key to switch the
function ON (or OFF).
Press the PTT switch to exit Menu
mode.
25