Kenwood UBZ-LH68 Bedienungsanleitung Seite 29

TRANSMIT POWER SAVE
The purpose of Transmit Power Save is to prevent
transmitting for too long. This function is useful, for
example, when you accidentally keep the PTT switch
pressed.
Holding down the PTT switch for more than 10 minutes
causes the transceiver to generate a beep and stop
transmitting. Release, then press the PTT switch again
to resume transmitting.
You can also switch this function OFF.
1
2
3
4
With the transceiver power OFF, press
and hold the UP key, then press the
POWER switch.
Press the UP or DOWN key to select
"tO" (Menu No. 8).
Press the MODE key to switch the
function OFF.
Press the PTT switch to exit Menu
mode.
23