Tecsis P3298 Betriebsanleitung Seite 20

7. Starting, operation
Mechanical connection
Generally the serial number
on the product label applies.
If there is no serial number on
the product label, the number
on the hexagon will apply.
Remove the sensor out of its package and make sure via the label that you

have the instrument with the right specifications.
When mounting the instrument, ensure that the sealing faces of the instrument and

the measuring point are clean and undamaged.
Screw in or unscrew the instrument only via the flats using a suitable tool and the

prescribed torque. The appropriate torque depends on the dimension of the pressure
connection and on the sealing element used (form/material). Do not use the case as
working surface for screwing in or unscrewing the instrument.
The respective values for your mounting torque and maximum pressure please

find in the documentation of your high-pressure equipment supplier.
When screwing the sensor in, ensure that the threads are not jammed.

20 Betriebsanleitung/Operating instructions/Mode d'emploi/Instrucciones de servicio Betriebsanleitung/Operating instructions/Mode d'emploi/Instrucciones de servicio
Product label (examples)
Pin assignment
Signal
Power Supply
Coded manufacture date
Serial No.
S #
P # Product No.
GB