Washing Instructions - Beemoo RANGE Gebrauchsanleitung

UK
DISASSEMBLY/ASSEMBLY THE CAR SEATS BACK AND BASE
Lay the seat down with the backrest fully reclined. Hold the base with one hand and pull
up the back of the chair with the other to separate the backrest from the base.
Assemble the backrest by inserting it in the same reclined position as disassembled.
Insert the backrest into the connecting shafts and fold the backrest back up.
14
MAINTENANCE
1. In daily use, check the car seat regularly. NOTE! The car seat must be replaced if
involved in an accident.
2. Please keep the car seat in a dry and ventilated place to avoid humidity and mold.
3. Clean the seat belt and the plastic parts by swiping them with a damp sponge or
cloth and leave it to dry.
4. To remove drink- and food stains on the seat belt and buckle, disassemble the seat
belt from the car seat and rinse it gently with warm water, and leave it to dry.
5. For cleaning the clothing of the car seat, please see below:

WASHING INSTRUCTIONS

ATTENTION! Never use any solvent, chemical detergent, or lubricant on any part of
your child seat.
• Hand wash, water temperature below 30 ºC.
• Do not bleach.
• Dry clean, any solvent except trichloroethylene
• Do not tumble dry.
• Do not iron.
REMOVE & ASSEMBLE THE CAR SEAT CLOTHING
1. First remove the crotch pad and the buckle of the car seat, then remove the
shoulder straps and cushion. Remove the clothing of the car seat.
2. To reassemble the clothing, operate by follow above instructions in reverse order.
UK
P
15