Beemoo RANGE Gebrauchsanleitung Seite 4

UK
INSTALLATION ISOFIX –
INSTALL BOOSTER SEAT IN THE VEHICLE
Applicable to vehicles equipped with ISOFIX system that meets the requirements of
ECE R14.
1. Find the ISOFIX fixed anchor point on the car and clip the two guide sleeves to the
two ISOFIX fixed anchor points of the car to facilitate subsequent installation.
2. Press and hold the ISOFIX unlock button while sliding outwards to adjust the
ISOFIX connectors on both sides of the car seat to the longest state.
3. Connect the ISOFIX connector of the car seat to the ISOFIX anchor point of the car
until you hear a "click"-sound.
Tip: For the location of the ISOFIX fixed anchor point, please check your car user
manual or contact your car manufacturer or local dealer.
6
INSTALLATION ISOFIX + 3-POINT SAFETY BELT
1. Follow above steps for the ISOFIX installation.
2. Let the child sit in the car seat and adjust the length of the safety belt guide hook
according to the child's height.
3. Pull out the cars three-point safety belt. The shoulder belt of the safety belt should
pass through the guide hook and the top of the armrest, and the abdominal belt of
the safety belt should pass through the guide grooves on both sides of the car seat
and is fixed to the car buckle. Hear a "click"-sound to ensure that the buckle is firmly
locked.
4. Adjust and tighten the car seat belt according to the size of the child. Check that
the belt is not turned over or twisted in any way, and make sure that the position of t
he waist blet is as low as possible, so that the child's pelvis can be better fixed.
NOTE!
Make sure that the shoulder belt is level with your child's shoulder.
UK
7