Beemoo RANGE Gebrauchsanleitung Seite 7

UK
INSTALLATION 3-POINT SAFETY BELT
1. Ensure that the ISOFIX connector of the car seat is retracted into the base. For the
suitable positions in the car, read the vehicle manual.
2. Let the child sit in the car seat. Pull out the cars three-point safety belt. The shoul
der strap of the safety belt should be placed on top of the armrest, and the
abdominal strap of the safety belt should pass through the guide grooves on both
sides of the car seat and is fixed to the car buckle. Hear a "click"-sound to ensure
that the buckle is firmly locked.
3. Adjust and tighten the car seat belt according to the size of the child. Check that
the belt is not turned over or twisted in any way, and make sure that the position of
the waist blet is as low as possible, so that the child's pelvis can be better fixed.
12
Click
DETACH ISOFIX FROM CAR SEAT
1. Press and hold the ISOFIX unlock switch on both sides at the same time.
The ISOFIX lock indicator turns red, which means it is unlocked.
2. Pull the car seat outwards to remove it.
HEADREST HIGHT ADJUSTMENT
Pull up the handle of the seat headrest to adjust it up and down, release the handle to
lock the head position.
Note: Please ensure that the seat headrest is locked.
UK
13