Beemoo RANGE Gebrauchsanleitung Seite 6

UK
INSTALLATION ISOFIX
-
INSTALL BOOSTER CUSHION IN THE VEHICLE
Applicable to vehicles equipped with ISOFIX system that meets the requirements of
ECE R14.
O K N O
1. Find the ISOFIX fixed anchorage point on the car and clip the two guide sleeves to
the two ISOFIX fixed anchorage points of the car to facilitate subsequent
installation.
2. Press and hold the ISOFIX unlock button while sliding outwards to adjust the
ISOFIX connectors on both sides of the anchorage seat to the longest state.
3. Connect the ISOFIX connector of the anchorage seat to the ISOFIX anchorage
point of the car until you hear a "click" sound.
Tip: For the location of the ISOFIX fixed anchorage point, please check your car's user
manual or contact your car manufacturer or local dealer.
10
BUCKLE UP WITH ISOFIX + 3-POINT SAFETY BELT
Applicable to vehicles equipped with ISOFIX system that meets the requirements of
ECE R14.
1. Follow above steps for the ISOFIX installation.
2. Let the child sit in the car seat. Pull out the cars three-point safety belt. The
shoulder strap of the safety belt should be placed on top of the armrest, and the
abdominal strap of the safety belt should pass through the guide grooves on both
sides of the car seat and is fixed to the car buckle. Hear a "click"-sound to ensure
that the buckle is firmly locked.
3. Adjust and tighten the car seat belt according to the size of the child. Check that
the belt is not turned over or twisted in any way, and make sure that the position of
the waist blet is as low as possible, so that the child's pelvis can be better fixed.
UK
Click
11