Beemoo RANGE Gebrauchsanleitung Seite 5

UK
INSTALLATION 3-POINT SAFETY BELT
1. Ensure that the ISOFIX connector of the car seat is retracted into the base. For the
suitable positions in the car, read the vehicle manual.
2. Let the child sit in the car seat and adjust the length of the safety belt guide hook
according to the child's height.
3. Pull out the cars three-point safety belt. The shoulder belt of the safety belt should
pass through the guide hook and the top of the armrest, and the abdominal belt of
the safety belt should pass through the guide grooves on both sides of the car seat
and is fixed to the car buckle. Hear a "click"-sound to ensure that the buckle is firmly
locked.
4. Adjust and tighten the car seat belt according to the size of the child. Check that
the belt is not turned over or twisted in any way, and make sure that the position of
the waist blet is as low as possible, so that the child's pelvis can be better fixed.
WARNING!
When used without the ISOFIX anchorages connected, the seat
should always be restrained by the vehicle belt when it is transported without the child.
NOTE!
Make sure that the shoulder belt is level with your child's shoulder.
8
CAR SEAT USED AS UNIVERSAL BOOSTER CUSHION
When the child exceeds the length limit 135 cm, the child must change to a seat suit-
able for longer children. By removing the backrest and using the car seat as a booster
cushion, it can be used until the child is 150 cm.
When the child exceeds the length limit 150 cm, the child must change to a seat
suitable for longer children, normally the vehicle seat.
When using the car seat as a booster seat without the backrest, please make sure to
fold the flap on the back of the seat underneath the seat cover.
UK
9