Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Battery and Charger
- The charging port is under the left pedal of the MS|3000 body, and
the charging port cover is opened and the charging interface is dry.
(Picture 13)
- Please insert the positioning groove of the charging port of the char-
ger at the charging port of the car body first, and then connect the
charger plug to the ac power socket. After charging, unplug the AC
power supply, and then unplug the connector that is connected to the
charging port of the scooter.
- In order to ensure the safety during transportation, the MS|3000 bat-
tery is not fully charged.There may be low or no power when first
used. This is normal. Don't worry. Charge according to the charging
method.
- Please use the MS|3000 original charger for charging. Do not use
other chargers for charging. The company will not be responsible for
any consequences caused by not using the original charger.
- The MS|3000 charging time takes about 5 - 8 hours (depending on
the battery pack capacity). When charging, the indicator light on the
charger lights up red, indicating that the power is on and charging.
When the indicator changes from red to green, the battery is fully
charged. Stop charging at this time. The maximum charging time
should not exceed 10 hours. Long-term charging will affect the life and
safety of the battery pack.
- Co not disassemble the charger, as it has a high voltage circuit.
- Do not connect the charger to the AC power supply without the char-
ger working, otherwise, it will damage the life of the charger. When
charging, the surrounding environment ventilated, and should be
away fire, no flammable or explosive materials around, finally do not
cover anything on the charger. Pay attention to prevent liquid and
metal particles from entering into the charger, prevent dropping it and
impact, so as to avoid damage
15
Werbung
