Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Usage and Operation
3.1 Learning to Drive
- Practice in a safe and empty place before taking the scooter out on
public roads.
- There is a risk of falling and injury so please wear a safety helmet
and protective gear.
- Step 1: Check if the power tire pressure is sufficient, and braking
performance before using the scooter.
- Step 2: Insert the key into the power switch located on the light, turn
it to the "ON" position, make sure the power indicator light is on.
- Step 3: Use your right hand to engage the throttle on the handle bar.
- Step 4: To brake or slow down, release the throttle with your right
hand then grip the brake handle with your left hand and squeeze.
Once the scooter comes to a complete stop, then turn the key to the
off position.
- Step 5: When done using the scooter, plug it in to charge.
- The scooter has a top speed of 12 mph (18km/h). It can't be turned
sharply under high speed. If the direction is changed sharply, it will
become unstable, which will cause the scooter to overturn, causing
the driver to fall and other risks.
10
Werbung
