KERN&SOHN EWJ 600-3 Betriebsanleitung Seite 149

15.5 Issue functions
15.5.1 Add-up mode < sum >
With this function the individual weighing values are added into the summation
memory by pressing a button and edited when an optional printer is connected.
Activate function:
In Setup menu invoke the menu setting < Print >  < sum > and confirm

with button [  ].
Use the navigation keys  to select the setting < on> and confirm on [  ] but-

ton.
 To exit the menu, press the navigation key  repeatedly
Condition: Menu setting
< prmode
Add-up weighed goods:
 If required, place empty container on scale and tare.
 Place first good to be weighed on balance. Wait until stability display (
pears and then press the PRINT-button. The display changes to < sum1 >, fol-
lowed by the current weighing value. The weighing value is stored and edited by
the printer. The symbol  pops up. Remove the weighed good.
 Place second good to be weighed on balance. Wait until stability display (
appears and then press the PRINT-button. The display changes to < sum2 >,
followed by the current weighing value. The weighing value is stored and edited
by the printer. Remove the weighed good.
 Add-up more weighed goods as described above.
 You can repeat this process until the capacity of the scales is exhausted.
Display and edit sum „Total":
 Press the PRINT key long time. The number of weighings and the total weight are
edited.
The sum memory is deleted; the symbol [..] extinguishes.
TEWJ-B-BA-def-2310
trig manual
 
> < > <
 <on>
>
) ap-
)
69