BabyGo Twinner 2 BASE Montageanleitung Seite 6

REMOVAL OF THE ISOFIX BASE
2
1
10
1.
Pull the adjustment lever
on the base above the
pedestal (1) to release the in-
fant carrier. Pull the carrycot
straight up (2) so that it comes
loose from the base.
2.
Pull the lever up in the
front half of the base.
TWINNER 2 - BASE
3.
Press the orange button on the
lsofix anchorage in- ward on
both sides (1), at the same time pull the
orange button on the anchorage on both
sides (2). Now loosen the lsofix base by
pulling it towards you. (3)
3
1
2
DE
EN
FR
11