Herunterladen Diese Seite drucken

BabyGo Twinner 2 BASE Montageanleitung Seite 5

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

INSTRUCTION MANUAL
EN
Dear Parents:
Thank you for purchasing the child seat base.
Please read and follow all instructions before using the child seat.
WARNING! Read the Instruction carefully before use and keep them
for future reference.
8
INSTALLATION OF THE ISOFIX BASE
1.
Pull up on the stand adjustment lever and at the same time press the adjustment on
the stand itself to bring it to the last position.
2.
Gently push the base into the lsofix anchorage of your car to connect the base to the
car.
3.
Check if the lsofix anchorage is correctly installed. The color must change from
orange to green.
4.
Push the base back toward the back of the car so that the baby carrier is as close as
possible to it.
1
2
5.
Press the button on the base of the station (1} and move the stand down so that it
touches the floor of the car and the color indicator changes from orange to green.
6.
Place the baby carrier on the base and place it so that it clicks into place. When the
color indicator turns green, the baby carrier is placed correctly.
TWINNER 2 - BASE
DE
EN
FR
9

Werbung

loading