Silvercrest SHAZ 22.2 F7 Bedienungsanleitung Seite 109

Switching the appliance on
1) Remove the vacuum cleaner from the wall bracket
using the wall bracket
socket
2) Press the On/Off switch
k
el
Note
► The appliance always starts in operating mode Eco after being switched on.
Selecting an operating mode
The appliance has two different operating modes, each of which differs in terms
of suction power and running time. Press the
operating mode:
Eco
–
For vacuuming hard floors, delicate carpets and rugs with low to medium
soiling.
–
The appliance consumes less battery power and the running time is
therefore longer.
–
Running time with fully charged battery approx. 45 minutes.
Boost
–
For vacuuming hard floors and carpeting with heavy soiling
–
Due to the high suction power, the best suction result is achieved with
a short running time.
–
Running time with fully charged battery approx. 25 minutes.
│ GB │ MT
■ 106
i
, pull the barrel plug
3
on the underside of the appliance.
shows the battery indicator
q
out of the charging
l
to switch on the appliance. The display pan-
j
and operating mode
y
i
. When you are not
h
(Eco/Boost).
button to select the
SHAZ 22.2 F7