Axkid MODUKID INFANT Bedienungsanleitung Seite 16

Verfügbare Sprachen

Installation in the car

AXKID MODUKID INFANT 2 can be installed in the car together with the AXKID MODUKID BASE or with belt installation with a three-

point belt, see Allowed and disallowed positioning of the AXKID MODUKID INFANT 2.

AXKID MODUKID BASE installation

To use AXKID MODUKID INFANT 2 together with AXKID MODUKID BASE, see the manual for AXKID MODUKID BASE for full

instructions of installation.

•

To install AXKID MODUKID INFANT 2 on AXKID MODUKID BASE:Pull the seat release handle (E) until it locks into its extended

position (see F6). Place the car seat in position on top of the AXKID MODUKID BASE and push the car seat down into the AXKID

MODUKID BASE until the seat release handle (E) clicks into locked position and the set atachment indicator shows green. The

bease attachment hooks (C) should now have attached to the car seat in both front and rear.

•

Ensure that the AXKID MODUKID INFANT 2 is not in contact with any adjacent vehicle seat and that the support leg is firmly

clamped to the floor and that the support leg installation buzzer (O) has stopped buzzing.

IMPORTANT: Make sure that the handle is in position A1.

Belt installation

Start by placing the infant car seat in the correct vehicle seat position.

Adjust the handle of the infant car seat to position A1.

Pull out sufficient length of vehicle seat belt (T, U) around the infant car seat and buckle the vehicle belt (S).

Guide the vehicle' s lap belt (T) through the belt guiding hooks (D) on the infant car seat and tighten the lap belt.

Pull the vehicle' s shoulder belt (U) around the seat and fix it in the belt guiding hook (F) on the rear of the infant car seat.

Push down the infant car seat in the vehicle' s seat and then pull the belt as tight as you can to make sure that the infant car seat

gets the most fixed position possible. Make sure there is sufficient space between the infant car seat and the car seat behind it.

IMPORTANT: Do not use any other vehicle seat belt routing then described in this manual. It could lead to the infant car seat not being

properly fastened which can lead to serious injuries in the event of an accident.