Cleaning - witeg LABMAX airless Bedienungsanleitung

All manuals and user guides at all-guides.com
www.witeg.de
Seal nut (15)
PTFE seal ring (16)
Glass plunger (17)
Return tube (21)

5.2 Cleaning

1. Follow the safety instructions!
2. Push the plunger downwards until it stops and then turn the valve axle (12) into the
draining position.
3. Let the remaining reagent in the ejection tube (6) flow back into the reagent bottle.
4. Place the device with the bottle into a suitable sink.
5. Unscrew the device from the bottle and slightly tap the inside of the bottle with the
suction tube (20) in order to drain it.
Disassemble the "Labmax airless"
The cleaning can be performed with distilled water and alcohol.
witeg Labortechnik GmbH, Dispenser LABMAX „airless"
21
PTFE Cylinder (18)
Valve head (19)
Suction tube (20)
until you can securely clean it from all reagent build up.