Seite 1
Mehrfach-Heizmantel mit Analog-Steuerung Bedienungsanleitung Multi Heating Mantle with analog Controller Operating Manual witeg Labortechnik GmbH...
Die sichere und fehlerfreie Nutzung des Gerätes setzt voraus, dass Sie sich die folgenden Anweisungen sorgfältig durchlesen und beim Umgang mit dem Gerät unbedingt befolgen. Betreiben Sie dieses Gerät nur an Stromkreisen, die mit einem Personen-Schutzschalter (RCD) ausgestattet sind. witeg Labortechnik GmbH, WHM Mehrfach-Heizmantel mit Steuerung...
Seite 4
Ziehen Sie den Netzstecker, wenn das Gerät längere Zeit nicht benutzt werden soll. Bedecken Sie niemals die Belüftungsschlitze am Gehäuse, dies könnte zur Zerstörung des Gerätes und zu Bränden führen. Beachten Sie die Einschränkungen bezüglich der Glassorten (siehe 3.4). witeg Labortechnik GmbH, WHM Mehrfach-Heizmantel mit Steuerung...
Sie erhalten die Geräte mit 3 und 6 Heizplätzen für Volumina von 250 bis 1.000 ml. Ideal zum Erhitzen von Proben in Rundkolben auf bis zu 450 °C. 3.2 Gesamtübersicht Drehknopf für Temperatur Heizleuchte Hauptschalter witeg Labortechnik GmbH, WHM Mehrfach-Heizmantel mit Steuerung...
Achten Sie darauf, dass keine Flüssigkeiten in das Gehäuse gelangen. Wenn Sie das Gerät längere Zeit nicht benutzen wollen, ziehen Sie bitte den Netzstecker heraus und lagern das Gerät trocken in der Verpackung. Verwenden Sie nur originale Ersatz- und Zubehörteile. witeg Labortechnik GmbH, WHM Mehrfach-Heizmantel mit Steuerung...
550 x 270 x 130 1.000 130-133 1.050 690 x 340 x 170 230/300 83-86 800 x 240 x 110 250/300 83-86 800 x 240 x 110 102-105 1440 950 x 270 x 130 witeg Labortechnik GmbH, WHM Mehrfach-Heizmantel mit Steuerung...
Connect the device only to the suitable power supply. Please have a look to the identification plate. Due to its functions the Heating Mantle is not protected against incoming water. Only a professional handling can avoid hazardous accidents. witeg Labortechnik GmbH, WHM Multi Heating Mantle with Controller...
Seite 11
It is superiorly to set the device in a good illuminated place to avoid accidents engendered by handling errors. To set the device in wet or dusty places could cause overheating, short circuits or fires. witeg Labortechnik GmbH, WHM Multi Heating Mantle with Controller...
Main switch On / Off switch. 3.4 Restrictions Please only use glass vessels that are made for heating applications. A minimum heat resistance like borosilicate glass 3.3 has is needed. witeg Labortechnik GmbH, WHM Multi Heating Mantle with Controller...
If you not want to use the device for a long time, pull of the power plug and keep it dry in the package. Only use original spare parts and accessories. Make sure that no liquid gets into the device. witeg Labortechnik GmbH, WHM Multi Heating Mantle with Controller...
550 x 270 x 130 1.000 130-133 1.050 690 x 340 x 170 230/300 83-86 800 x 240 x 110 250/300 83-86 800 x 240 x 110 102-105 1440 950 x 270 x 130 witeg Labortechnik GmbH, WHM Multi Heating Mantle with Controller...
Please look on your account and complete following table: Article WHM Multi Heating Mantle with analog Controller Serialno. Date witeg Labortechnik GmbH Am Bildacker 16 D-97877 Wertheim TEL: +49-9342-9301-0 FAX: +49-9342-9301-77 Email: info@witeg.de www.witeg.de witeg Labortechnik GmbH, WHM Multi Heating Mantle with Controller...