To Be Considered Before Initial Operation; Warranty; Operating Limitations - witeg LABMAX airless Bedienungsanleitung

All manuals and user guides at all-guides.com
www.witeg.de

1.2 To be considered before initial Operation

- Check that the device has not been damaged in transit.
- Push the suction tube (20) on tightly.
- Do not carry the device at the outer housing (2).
- Push ejection cannula (6) on tightly and slide the cannula holder (7) into the formed
grooves.
- When screwing on the bottle do not grip the device at its outer housing (2) Hold the
housing at the bottom screw cap (as well as during unscrewing).
- Do not pump before the device has been assembled completely and a collecting vessel
has been placed underneath.

1.3 Warranty

Witeg warrantees the "Labmax airless"
workmanship for 12 months from the date of purchase. Witeg´s responsibility shall be limited to
the repair or replacement of the
This warranty is valid only if the
manual and for the purpose for which it is designed.
Witeg shall not be responsible for consequential damages resulting from the misuse of this
equipment.

1.4 Operating Limitations

The "Labmax airless" is suitable for dispensing most liquids. Extra care should be taken when
dispensing dangerous or hazardous solutions.
"Labmax airless"
The Dispenser should not be used for dispensing the following :
- solutions of hydrofluoric acids
- solutions which contain any form solids
- solutions of substances catalysed by platinum and iridium alloys
The "Labmax airless" should be rinsed daily if used with the following:
- Solutions which form crystals
- Inorganic oxidation solutions (i.e. biuret reagent)
The temperature of the "Labmax airless"
witeg Labortechnik GmbH, Dispenser LABMAX „airless"
17
you have received to be free of defects in material and
"Labmax airless".
"Labmax airless" is used in the manner described in this
and reagent should not exceed 40° C (104° F).