SOMFY Sonesse 30 RS485 Anleitung Seite 8

EN
CAUTION
• Leave the drive power supply cable accessible: the product must be easily
replaceable.
• Always make a loop in the power supply cable to prevent water from
entering the drive.
WARNING
To ensure electrical safety, this Class III drive must be powered by a "class 2"
power source (SELV -Safety Extra Low Voltage) + LPS (Limited Power Supply).
2.1.7.2.Data wiring
CAUTION
• For RJ45 connector version, there is a RJ45
female to female coupler provided with the
drive to add easily an extension cable.
• Make sure the data cable is not pinched or
damaged during the installation of the drive/
tube onto the end bracket.
Connect the data cables to the drive according to the information in the tables below.
1: +RS485
5: Not
connected*
1: Power (+) 2: Power (-) 3: Data (+) 4: Data (-)
* If connected, the drive can be damaged.
8
RJ45 connector
2: -RS485
6: Not
connected*
Weidmuller connector
Copyright
3: Not
connected*
7: Not
connected*
©
2022 SOMFY ACTIVITES SA. All rights reserved.
Sonesse 30 RS485
4: Not
connected*
8: Ground
5: Data
Ground
1 2 3 4 5 6 7 8
1 2 3 4 5